How to Fix Blue Screen STOP Error Code 0x0000007b in Windows 10, 8, 7, & XP

Rate this post


Summary:  This article is about the solution to fix Blue Screen STOP Error Code 0x0000007b in Windows 10, 8, 7, & XP.

Sometimes, you might face the situation when your system screen turns to blue and shows a message of the restart. Below is the image of that scenario.


This is known as Blue Screen of Death (BSOD) this is the most disturbing errors that can occur in a system. In technical terms, these are termed as STOP Error, BSOD. However, these errors occur when the Windows operating system either refuses to boot entirely or due to some internal errors either in your system hardware or else in hardware drivers.

There are some common Stop Code Errors are 0x0000007b, 0x00000058, 0x00000133, 0x000000D1, 0x1000007E, 0xC000021A, 0xC000000F. The STOP Error Code 0x0000007b is one of the crucial errors.

Blue Screen STOP Error Code 0x0000007b – Overview

This Blue Screen Error STOP Code 0x0000007b is introduced when your system is booted from the wrong copy of the mirrored partition. The screen will also display FTDISK_INTERNAL_ERROR. Mostly this error is encountered when you install a new hardware or software. Moreover, you should know about the symptoms of this error.

Symptoms of the Blue Screen Stop Error Code 0x0000007b

The common symptoms of the error code are as given below:

  • The screen shows “FTDISK_INTERNAL_ERROR”.
  • The crash of an active program or application.
  • The system crashes after the occurrence of error 0x0000007b.
  • The sluggish processing of Windows.
  • The system freezes for a few seconds at times.
  • Delay response to actions or inputs of mouse or keyboard.
  • The appearance of the error message: “The FTDISK_INTERNAL_ERROR bug check has a value of 0x0000007b. This is issued if the system is booted from the wrong copy of a mirrored partition.”
  • The appearance of the error message: “A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file:”

You must keep the track of the symptoms of the Stop Error to troubleshoot the problem. There are some other reasons for Blue Screen Stop Error Code 0x0000007b

  1. Corruption in memory.
  2. The hard disk is damaged.
  3. System files are damaged.
  4. Virus or malware corruption.
  5. Corrupt Windows registry.
  6. Outdated or corrupted device drivers.
  7. Improperly configured device drivers.
  8. Driver conflict issue because of new hardware installation.

Also Read: 9 Easy Steps to Recover Deleted Photos from SD Card for Free

So, let’s find the solution to fix the blue screen.

Ways to fix the Blue Screen Stop Error Code 0x0000007b

Follow the below steps to troubleshoot this problem:

Method 1: Perform the System Comprehensive Scan

Generally, malware infection is the most common cause of FTDISK_INTERNAL_ERROR. So, to nullify the effect of virus or malware, run a full scan of the system with the use of a reliable anti-malware program.

Method 2: Remove System Junk

When the junk files gathered on the system it results in a sluggish response of the Windows Operating System and due to overload it pushes FTDISK_INTERNAL_ERROR. Though, it is required to clean junk files that can help to fix the issue. Moreover, system performance will become faster. To clean the junk data, use the Windows Disk Cleanup (cleanmgr) tool the process is described below:

  • Go to the Start button on your system.
  • In the search tab, type command and choose Command Prompt.
  • Press CTRL + Shift keys altogether and press Enter.
  • Click on Yes on the permission pop-up.
  • Below the black box with a blinking cursor, key-in cleanmgr, and press Enter.
  • Choose the drive to clean up and press OK.
  • Wait for a while so that Disk Cleanup calculates the occupied disk space for reclaim.
  • Tick marks the categories boxes that need cleaning.
  • Finally, click on OK.
Method 3: Run the Windows System File Checker

The Window System File Checker (“sfc/scannow”) is accessible Windows utility. This service scans the Windows system files and also restores corruption (including FTDISK_INTERNAL_ERROR corruption). Follow the following steps to run System File Checker:

  • Go to the Start button on your system.
  • Below the search box, Key-in command.
  • Press CTRL + Shift Key together and press Enter.
  • In the permission dialog box, click on Yes.
  • Write sfc /scannow in a black box with a blinking cursor.
  • Then, press Enter.
  • Permit System File Checker to scan for issues.
  • Follow on-screen commands to fix the issue.
Method 4: Reset Recent System Changes

System Restore is one of active utility provided by Windows. This permits to “go back in time”. Due to which, you can avoid the potential troubleshooting hours to fix the FTDISK INTERNAL ERROR error. Follow these steps:

  • OpenStart on your system.
  • Below the search box, key-in systems restores and then choose to Create a restore point.
  • Press the Enter.
  • Click on System Restore.
  • Then, on prompt, key-in the administrator passwords.
  • Follow wizard steps to choose a restore point.
  • At last, restore the PC.
Method 5: Re-installation the Operating System Program

Re-installation the Windows operating system is also an effective way to fix the blue screen error issue. By this method, errors associated with the specific application can easily remove. Follow the following steps.

  • Go to Start and right-click to open its Context Menu.
  • Click on the Programs and Features tab.
  • Under the Name column, inspect the program that is creating trouble.
  • Click on Uninstall.
  • Follow the on-screen steps to uninstall the program.
  • At last, reinstall the program.

Now, after troubleshooting the Blue Screen Stop Error Code (0x0000007b), you need to recover the inaccessible data.The most efficient method for data restoration is to take a backup of data. However, if you don’t take a backup is recently and also it not available at all, you can try Windows Data Recovery software to restore lost or deleted data without any complications.


Hope, this article will help you to troubleshoot the error with the above-mentioned methods. Sometimes, while fixing the error you can’t access the data. In such scenario, don’t upset and trust Data Recovery tool to recover the data quickly.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *